Contemporary Worship - Room Setup: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(Finished making a bunch of edits and filling out the tear down sections (I broke out Rehearsal and Sunday tear down)) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
== Full Setup == | == Full Setup == | ||
This applies to both Thursday night rehearsal and Sunday Morning. | |||
# Unlock & open cabinets. | # Unlock & open the cabinets. | ||
#:[[File:CW_RoomSetup_UnlockAndOpenCabinets.jpg|x150px]] | #: [[File:CW_RoomSetup_UnlockAndOpenCabinets.jpg|x150px]] | ||
# Turn on the Sound board. The switch is on the rear right. | |||
#: [[File:CW RoomSetup SoundBoardOn.jpg|x150px]] [[File:CW RoomSetup SoundBoardPowerRockerOn.jpg|alt=Rear power rocker switch, shown on|x150px]] | |||
# Setup the Projection laptop. | # Setup the Projection laptop. | ||
#:[[File:CW RoomSetup ProjectionLaptopClosed | #: [[File:CW RoomSetup ProjectionLaptopClosed.jpg|x150px]] | ||
## Lift the monitor up and position it next to the laptop. | ## Lift the monitor up and position it next to the laptop. | ||
## Power on the monitor using the rightmost button on the bottom. | ## Power on the monitor using the rightmost button on the bottom. | ||
| Line 10: | Line 13: | ||
## Open the laptop and log in to Windows. | ## Open the laptop and log in to Windows. | ||
## Start ProPresenter. | ## Start ProPresenter. | ||
# | #: [[File:CW RoomSetup ProjectionLaptopSetup.jpg|x150px]] | ||
# Set up the Lighting board. | # Set up the Lighting board. | ||
## Carefully lift and rotate the monitor to stand it up. Place the keyboard in front of the lighting (EOS) board. | |||
## Carefully lift and rotate the monitor to stand it up. | ##: [[File:CW RoomSetup LightingBoardSetup.jpg|x150px]] | ||
## Press the power button on the back right corner of the Apple box to turn it on. | ## Press the power button on the back right corner of the Apple box to turn it on. | ||
## Log into Mac OS. | ##: [[File:CW RoomSetup LightingBoardMac.jpg|x150px]] [[File:CW RoomSetup LightingBoardMacPowerButton.jpg|x150px]] | ||
## Log into Mac OS. The EOS Family program will start automatically. | |||
##: [[File:CW RoomSetup LightingBoardOn.jpg|x150px]] | |||
## You may notice the lights change and/or move around as the program starts and takes control over the lights. This is normal. | |||
# Set up Video Switcher. | # Set up Video Switcher. | ||
#:[[File:CW RoomSetup VideoOff | #:[[File:CW RoomSetup VideoOff.jpg|x150px]] | ||
## Turn on the power strip behind the monitor. | ## Turn on the power strip behind the monitor. | ||
## Lift the monitor up and stand it | ##: [[File:CW RoomSetup VideoPowerStrip.jpg|x150px]] | ||
## Lift the monitor up and stand it behind the switcher and joystick console, carefully positioning the leg on the left under the cords coming out of the Roland switcher. | |||
##: [[File:CW RoomSetup VideoOn.jpg|x150px]] | |||
# Go to the back cupboard. | # Go to the back cupboard. | ||
#:[[File:CW RoomSetup BackCupboardAndClosetClosed | #:[[File:CW RoomSetup BackCupboardAndClosetClosed.jpg|x150px]] | ||
## Open the cupboard. | ## Open the cupboard. | ||
## On the black panel on the right, press 2, 5, and 9 (Video On, Sound On, and HDMI Wall). | ##: [[File:CW RoomSetup BackCupboardOpen.jpg|x150px]] | ||
## On the black panel on the right, press 2, 5, and 9 (Video On, Sound On, and HDMI Wall). Flip up the "Cameras" switch to the right of the black panel. | |||
##: [[File:CW RoomSetup SerialButtons.jpg|x150px]] | |||
## On the white panel on the left, press the "All On" and "Worship" buttons. | ## On the white panel on the left, press the "All On" and "Worship" buttons. | ||
##: [[File:CW RoomSetup Toggles.jpg|x150px]] | |||
## Get the black LG remote control sitting in the top right corner, point it at the stage monitor TV on the back wall, use the power button at the top to turn it on, then return it to its place. | ## Get the black LG remote control sitting in the top right corner, point it at the stage monitor TV on the back wall, use the power button at the top to turn it on, then return it to its place. | ||
##: [[File:CW RoomSetup TurnOnStageMonitor.jpg|x150px]] | |||
# On the Sound Board, press the green User button on the left. | # On the Sound Board, press the green User button on the left. | ||
#:[[File:CW RoomSetup SoundBoardUserButton.jpg|x150px]] | #:[[File:CW RoomSetup SoundBoardUserButton.jpg|x150px]] | ||
# Turn on the stage lights. | # Turn on the stage lights. | ||
# | ## Go on-stage and head through the gap in the curtains on stage-left. | ||
# | ##: [[File:CW RoomSetup GoStageLeft.jpg|x150px]] | ||
## On the box by the breakers, flip all 3 switches up (to On). | ## On the box by the breakers, flip all 3 switches up (to On). | ||
##: [[File:CW RoomSetup FindStageLightSwitches.jpg|x150px]] [[File:CW RoomSetup FlipStageLightSwitches.jpg|x150px]] | |||
# Get the wireless microphones. | # Get the wireless microphones. | ||
## Go through the opposite gap in the curtains on stage-right and turn right. | ## Go through the opposite gap in the curtains on stage-right and turn right. | ||
## If you want light, flip the light switch to the left of the door in the back left corner. | ##: [[File:CW RoomSetup GoStageRight.jpg|x150px]] | ||
## | ## Find the wooden cupboard on the wall to the left near the big rack full of audio and lighting hardware. If you want light, flip the light switch to the left of the door in the back left corner. | ||
##: [[File:CW RoomSetup OpenBackstageCupboard.jpg|x150px]] | |||
## Open the left door of the cupboard and pull out the plastic container with wireless microphones from the middle shelf. | ## Open the left door of the cupboard and pull out the plastic container with wireless microphones from the middle shelf. | ||
##: [[File:CW RoomSetup GetMicsFromCupboard.jpg|x150px]] | |||
## Get mics #5, 6, 7, & 8, depending on how many vocalists there will be. | ## Get mics #5, 6, 7, & 8, depending on how many vocalists there will be. | ||
##: [[File:CW RoomSetup Microphones.jpg|x150px]] | |||
## Install the microphones on the stands, starting with the keyboard and working towards towards stage-left, then back stage-right towards back stage-left. | ## Install the microphones on the stands, starting with the keyboard and working towards towards stage-left, then back stage-right towards back stage-left. | ||
== Tear Down == | == Rehearsal Tear Down == | ||
Everything can be turned off after Thursday night rehearsals. | |||
# | # Turn off the Sound Board. | ||
# | ## Make sure everything is muted. | ||
# | ## Press the Home button (under the screen). | ||
# | ##:[[File:CW RoomSetup SoundBoardPressHome.jpg|x150px]] | ||
# | ## Press Soft Power on the screen to start the proper shutdown process. | ||
[[File:CW RoomSetup | ##:[[File:CW RoomSetup SoundBoardPressSoftPower.jpg|x150px]] | ||
# | ## Wait for the screen to say it's safe to power down. | ||
# | ##:[[File:CW RoomSetup SoundBoardWait.jpg|x150px]] [[File:CW RoomSetup SoundBoardSafeToPowerOff.jpg|x150px]] | ||
# | ## Toggle the rocker switch on the rear right right to power off the mixer. | ||
# | ##:[[File:CW RoomSetup SoundBoardPowerRockerOn.jpg|x150px]] | ||
# | # Turn off the Lighting board. | ||
## Click the triangle at the bottom right. | |||
##: [[File:CW RoomSetup LightingClickTriangle.jpg|x150px]] | |||
## Double-click Exit from the menu that has popped up towards the right. | |||
##: [[File:CW RoomSetup LightingDoubleClickExit.jpg|x150px]] | |||
## Click OK to quit the program | |||
##: [[File:CW RoomSetup LightingClickOK.jpg|x150px]] | |||
## You may notice the lights change and/or move around as the EOS Family program shuts down and gives up control of the lights. This is normal. | |||
## Once the program has shut down, click the Apple logo at the top left, then click Shut Down... | |||
##: [[File:CW RoomSetup LightingClickShutdown.jpg|x150px]] | |||
## Click Shut Down to confirm that you want to shut down immediately. | |||
##: [[File:CW RoomSetup LightingConfirmShutdown.jpg|x150px]] | |||
## Carefully lift and rotate the monitor down to rest onto the board and into the recess behind. Put the keyboard back on top of the Apple box. | |||
##: [[File:CW RoomSetup LightingBoardTearDown.jpg|x150px]] | |||
# Turn off the Projection laptop. | |||
## Close ProPresenter | |||
## Close the laptop | |||
## Power off the monitor using the rightmost button on the bottom. | |||
## Lift the monitor up and lay it down gently next to the laptop. | |||
##: [[File:CW RoomSetup ProjectionLaptopClosed.jpg|x150px]] | |||
# Turn off the Video Switcher. | |||
## Carefully lift the monitor up (without pulling any cords out from the switcher) and lay it gently down between the switcher and the joystick console | |||
##:[[File:CW RoomSetup VideoOff.jpg|x150px]] | |||
## Turn off the power strip behind the monitor. | |||
##: [[File:CW RoomSetup VideoPowerStrip.jpg|x150px]] | |||
# Go to the back cupboard. | |||
#:[[File:CW RoomSetup BackCupboardOpen.jpg|x150px]] | |||
## On the black panel on the right, press 1 and 4 (Video Off and Sound Off). Flip down the "Cameras" switch to the right of the black panel. | |||
##:[[File:CW RoomSetup SerialButtonsOff.jpg|x150px]] | |||
## Get the black LG remote control sitting in the top right corner, point it at the stage monitor TV on the back wall, use the power button at the top to turn it off, then return it to its place. | |||
##: [[File:CW RoomSetup TurnOnStageMonitor.jpg|x150px]] | |||
# Turn off the stage lights. | |||
## Go on-stage and head through the gap in the curtains on stage-left. | |||
##: [[File:CW RoomSetup GoStageLeft.jpg|x150px]] | |||
## On the box by the breakers, flip all 3 switches down (to Off). | |||
##: [[File:CW RoomSetup FindStageLightSwitches.jpg|x150px]] [[File:CW RoomSetup FlipStageLightSwitchesOff.jpg|x150px]] | |||
# Put the wireless microphones away (if the Worship team hasn't already done so). | |||
## Go through the opposite gap in the curtains on stage-right and turn right. | |||
##: [[File:CW RoomSetup GoStageRight.jpg|x150px]] | |||
## Find the wooden cupboard on the wall to the left near the big rack full of audio and lighting hardware. If you want light, flip the light switch to the left of the door in the back left corner. | |||
##: [[File:CW RoomSetup OpenBackstageCupboard.jpg|x150px]] | |||
## Open the left door of the cupboard and pull out the plastic container from the middle shelf. | |||
##: [[File:CW RoomSetup GetMicsFromCupboard.jpg|x150px]] | |||
## Gather microphones #5-8 from the stage and put them back in the plastic container. | |||
##: [[File:CW RoomSetup Microphones.jpg|x150px]] | |||
## Return the container to the middle shelf and close the cupboard. | |||
# Close & lock the cabinets. | |||
#: [[File:CW RoomSetup CloseAndLockCabinets.jpg|x150px]] | |||
== Sunday Morning Tear Down == | |||
Most things get shut back down, but the stage lights get left on for Blessed Generation. | |||
# Make sure the stream has been ended (via YouTube's interface) and the Monarch is stopped (either through the Web Interface or by pressing the blue "Stream" and/or red "Record" buttons on the silver Matrox Monarch box until both lights are steady and not flashing). | |||
# Start the PreWorship playlist in Spotify and bring up the PC Audio on the Sound Board. Make sure everything else is muted. | |||
# Turn off the Video Switcher. | |||
## Carefully lift the monitor up (without pulling any cords out from the switcher) and lay it gently down between the switcher and the joystick console | |||
##:[[File:CW RoomSetup VideoOff.jpg|x150px]] | |||
## Turn off the power strip behind the monitor. | |||
##: [[File:CW RoomSetup VideoPowerStrip.jpg|x150px]] | |||
# Turn off the Lighting board. | |||
## Click the triangle at the bottom right. | |||
##: [[File:CW RoomSetup LightingClickTriangle.jpg|x150px]] | |||
## Double-click Exit from the menu that has popped up towards the right. | |||
##: [[File:CW RoomSetup LightingDoubleClickExit.jpg|x150px]] | |||
## Click OK to quit the program | |||
##: [[File:CW RoomSetup LightingClickOK.jpg|x150px]] | |||
## You may notice the lights change and/or move around as the EOS Family program shuts down and gives up control of the lights. This is normal. | |||
## Once the program has shut down, click the Apple logo at the top left, then click Shut Down... | |||
##: [[File:CW RoomSetup LightingClickShutdown.jpg|x150px]] | |||
## Click Shut Down to confirm that you want to shut down immediately. | |||
##: [[File:CW RoomSetup LightingConfirmShutdown.jpg|x150px]] | |||
## Carefully lift and rotate the monitor down to rest onto the board and into the recess behind. Put the keyboard back on top of the Apple box. | |||
##: [[File:CW RoomSetup LightingBoardTearDown.jpg|x150px]] | |||
# Put the wireless microphones away (if the Worship team hasn't already done so). | |||
## Go on stage, head through the gap in the curtains on stage-right, and turn right. | |||
##: [[File:CW RoomSetup GoStageRight.jpg|x150px]] | |||
## If you want light, flip the light switch to the left of the door in the back left corner. | |||
## Find the wooden cupboard on the wall to the left near the big rack full of audio and lighting hardware. | |||
##: [[File:CW RoomSetup OpenBackstageCupboard.jpg|x150px]] | |||
## Open the left door of the cupboard and pull out the plastic container from the middle shelf. | |||
##: [[File:CW RoomSetup GetMicsFromCupboard.jpg|x150px]] | |||
## Gather microphones #5-8 from the stage and put them back in the plastic container. | |||
##: [[File:CW RoomSetup Microphones.jpg|x150px]] | |||
## Return the container to the middle shelf and close the cupboard. | |||
# Fade out, then mute the PC Audio on the Sound Board. | |||
# Stop the Spotify playlist on the Projection laptop. | |||
# Go to the back cupboard. | |||
#:[[File:CW RoomSetup BackCupboardOpen.jpg|x150px]] | |||
## On the black panel on the right, press 1 and 4 (Video Off and Sound Off). Flip down the "Cameras" switch to the right of the black panel. | |||
##:[[File:CW RoomSetup SerialButtonsOff.jpg|x150px]] | |||
## Get the black LG remote control sitting in the top right corner, point it at the stage monitor TV on the back wall, use the power button at the top to turn it off, then return it to its place. | |||
##: [[File:CW RoomSetup TurnOnStageMonitor.jpg|x150px]] | |||
# Turn off the Sound Board. | |||
## Press the Home button (under the screen). | |||
##:[[File:CW RoomSetup SoundBoardPressHome.jpg|x150px]] | |||
## Press Soft Power on the screen to start the proper shutdown process. | |||
##:[[File:CW RoomSetup SoundBoardPressSoftPower.jpg|x150px]] | |||
## Wait for the screen to say it's safe to power down. | |||
##:[[File:CW RoomSetup SoundBoardWait.jpg|x150px]] [[File:CW RoomSetup SoundBoardSafeToPowerOff.jpg|x150px]] | |||
## Toggle the rocker switch on the rear right right to power off the mixer. | |||
##:[[File:CW RoomSetup SoundBoardPowerRockerOn.jpg|x150px]] | |||
# Turn off the Projection laptop. | |||
## Close ProPresenter | |||
## Close the laptop | |||
## Power off the monitor using the rightmost button on the bottom. | |||
## Lift the monitor up and lay it down gently next to the laptop. | |||
##: [[File:CW RoomSetup ProjectionLaptopClosed.jpg|x150px]] | |||
# Close & lock the cabinets. | |||
#: [[File:CW RoomSetup CloseAndLockCabinets.jpg|x150px]] | |||
# Go back on stage and gather up the 8 music binders. Take the binders to the choir room and place them on top of the Contemporary Music file cabinet. | |||
Latest revision as of 21:25, 14 October 2023
Full Setup
This applies to both Thursday night rehearsal and Sunday Morning.
- Unlock & open the cabinets.
- Turn on the Sound board. The switch is on the rear right.
- Setup the Projection laptop.
- Lift the monitor up and position it next to the laptop.
- Power on the monitor using the rightmost button on the bottom.
- Position the keyboard in front of the laptop if it isn't already (make sure it's plugged into the USB on the right; if a thumb drive is in there, remove it and place it in front of the monitor).
- Open the laptop and log in to Windows.
- Start ProPresenter.
- Set up the Lighting board.
- Carefully lift and rotate the monitor to stand it up. Place the keyboard in front of the lighting (EOS) board.
- Press the power button on the back right corner of the Apple box to turn it on.
- Log into Mac OS. The EOS Family program will start automatically.
- You may notice the lights change and/or move around as the program starts and takes control over the lights. This is normal.
- Set up Video Switcher.
- Go to the back cupboard.
- Open the cupboard.
- On the black panel on the right, press 2, 5, and 9 (Video On, Sound On, and HDMI Wall). Flip up the "Cameras" switch to the right of the black panel.
- On the white panel on the left, press the "All On" and "Worship" buttons.
- Get the black LG remote control sitting in the top right corner, point it at the stage monitor TV on the back wall, use the power button at the top to turn it on, then return it to its place.
- On the Sound Board, press the green User button on the left.
- Turn on the stage lights.
- Get the wireless microphones.
- Go through the opposite gap in the curtains on stage-right and turn right.
- Find the wooden cupboard on the wall to the left near the big rack full of audio and lighting hardware. If you want light, flip the light switch to the left of the door in the back left corner.
- Open the left door of the cupboard and pull out the plastic container with wireless microphones from the middle shelf.
- Get mics #5, 6, 7, & 8, depending on how many vocalists there will be.
- Install the microphones on the stands, starting with the keyboard and working towards towards stage-left, then back stage-right towards back stage-left.
Rehearsal Tear Down
Everything can be turned off after Thursday night rehearsals.
- Turn off the Sound Board.
- Turn off the Lighting board.
- Click the triangle at the bottom right.
- Double-click Exit from the menu that has popped up towards the right.
- Click OK to quit the program
- You may notice the lights change and/or move around as the EOS Family program shuts down and gives up control of the lights. This is normal.
- Once the program has shut down, click the Apple logo at the top left, then click Shut Down...
- Click Shut Down to confirm that you want to shut down immediately.
- Carefully lift and rotate the monitor down to rest onto the board and into the recess behind. Put the keyboard back on top of the Apple box.
- Turn off the Projection laptop.
- Turn off the Video Switcher.
- Go to the back cupboard.
- On the black panel on the right, press 1 and 4 (Video Off and Sound Off). Flip down the "Cameras" switch to the right of the black panel.
- Get the black LG remote control sitting in the top right corner, point it at the stage monitor TV on the back wall, use the power button at the top to turn it off, then return it to its place.
- Turn off the stage lights.
- Put the wireless microphones away (if the Worship team hasn't already done so).
- Go through the opposite gap in the curtains on stage-right and turn right.
- Find the wooden cupboard on the wall to the left near the big rack full of audio and lighting hardware. If you want light, flip the light switch to the left of the door in the back left corner.
- Open the left door of the cupboard and pull out the plastic container from the middle shelf.
- Gather microphones #5-8 from the stage and put them back in the plastic container.
- Return the container to the middle shelf and close the cupboard.
- Close & lock the cabinets.
Sunday Morning Tear Down
Most things get shut back down, but the stage lights get left on for Blessed Generation.
- Make sure the stream has been ended (via YouTube's interface) and the Monarch is stopped (either through the Web Interface or by pressing the blue "Stream" and/or red "Record" buttons on the silver Matrox Monarch box until both lights are steady and not flashing).
- Start the PreWorship playlist in Spotify and bring up the PC Audio on the Sound Board. Make sure everything else is muted.
- Turn off the Video Switcher.
- Turn off the Lighting board.
- Click the triangle at the bottom right.
- Double-click Exit from the menu that has popped up towards the right.
- Click OK to quit the program
- You may notice the lights change and/or move around as the EOS Family program shuts down and gives up control of the lights. This is normal.
- Once the program has shut down, click the Apple logo at the top left, then click Shut Down...
- Click Shut Down to confirm that you want to shut down immediately.
- Carefully lift and rotate the monitor down to rest onto the board and into the recess behind. Put the keyboard back on top of the Apple box.
- Put the wireless microphones away (if the Worship team hasn't already done so).
- Go on stage, head through the gap in the curtains on stage-right, and turn right.
- If you want light, flip the light switch to the left of the door in the back left corner.
- Find the wooden cupboard on the wall to the left near the big rack full of audio and lighting hardware.
- Open the left door of the cupboard and pull out the plastic container from the middle shelf.
- Gather microphones #5-8 from the stage and put them back in the plastic container.
- Return the container to the middle shelf and close the cupboard.
- Fade out, then mute the PC Audio on the Sound Board.
- Stop the Spotify playlist on the Projection laptop.
- Go to the back cupboard.
- On the black panel on the right, press 1 and 4 (Video Off and Sound Off). Flip down the "Cameras" switch to the right of the black panel.
- Get the black LG remote control sitting in the top right corner, point it at the stage monitor TV on the back wall, use the power button at the top to turn it off, then return it to its place.
- Turn off the Sound Board.
- Turn off the Projection laptop.
- Close & lock the cabinets.
- Go back on stage and gather up the 8 music binders. Take the binders to the choir room and place them on top of the Contemporary Music file cabinet.